The new production of lipstick tube

Lipstick sticks are widely used because they are a widely used cosmetic and a daily routine for many women. For convenience, most lipstick sticks are attached at an incline where the insert contacts the lips. If the bottom edge of the lipstick applicator is close to the mouth of the lipstick tube, you can discard the remaining lipstick stick because the lips touch the mouth of the lipstick application and are difficult to use . However, the lipstick stick penetrates the mouth of the tube, that is, some of the lipstick used remains inside the lipstick tube, and at the same time, the surface of the lipstick stick is inclined.If the lower edge of the spout is closer to the mouth of the lipstick tube, it will be in this position: most of the used part, that is, most of the lipstick stick, is still in the nozzle. Disposable waste is a major waste.
The underside of the smear surface is close to the mouth of the lipstick tube and can be discarded, causing a lot of waste. The construction is simple, cheap and can be used when the bottom end of the lipstick is close to the mouth of the lipstick tube, it is best to use the lipstick tube for the rest of the bottom lipstick. mouth

SIZE 14X91.5mm                                                      SIZE Φ13X13X82.1mm,CUP SIZE Φ6.3mm

The lipstick tube mainly consists of a tube body with a rotating portion at the bottom and a fitting body at the top of the tube body which can be easily separated. Furthermore, the pipe body has a notch that matches the joint body, and the joint body fits into the notch, and is connected to the notch by a connecting body. The thickness of the joint exceeds the thickness of the pipe body to separate the joint from the pipe body by forcible breaking of the joint or by cutting the joint with a tool such as a knife. For better identification of the present invention, the entire connecting body has an arc shape. To ensure proper functionality, both the connecting body and the matching body are made of plastic material and have been molded together using injection molding.
The new type lipstick tube body has a fitted body, ideal for separating the fitting body using the lower lipstick stick, the easier it is to use the bottom of the lipstick stick, the better . . . . .. tube body to minimize waste. The pipe body has a notch that fits the joint body, and after the joint body is attached to the notch, the entire pipe body becomes a regular cylinder. The thickness of the joint exceeds the thickness of the side wall of the tube body, which is suitable for breaking the joint by force or for cutting the joint with a tool such as a knife to separate the fitting body. Open the tube body to pass through the cut. The notch exposes the body of the tube, so the lower part of the rod is handy.