Commonly used cosmetic packaging materials
• Bottles (including plastic bottles, glass bottles, etc.);
• Caps [including outer caps, inner caps, (plugs, pads, membranes), etc.];
• Bags (including paper bags, plastic bags, composite bags);
• Hoses (including plastic hoses, composite hoses, metal hoses, etc.);
• Boxes (including plastic paper boxes, plastic boxes, metal boxes, etc.);
• Spray cans (including pressure-resistant aluminum cans, iron cans, etc.);
• Spindle tubes (including lipstick tubes, foundation tubes, mascara tubes, etc.);
• Makeup Pen
• Nozzles (including air pressure type and pump type);
• Outer boxes (including flower boxes, plastic seals, middle boxes, transport packaging, etc.).
Packaging Material Requirements
The materials used in the packaging of cosmetic products must be safe and should not cause harm to the human body.
Packaging Appearance Requirements
1. The body of the bottle should be stable, the surface should be smooth, the thickness of the bottle wall should be basically uniform, there should be no obvious scars or deformation, and there should be no cold bursts or cracks. The mouth of the bottle should be straight and smooth, no burrs (burrs) should be used, and the thread and bayonet fitting structure should be intact and straight. The fit between the bottle and the cap should be tight, without slipping, loosening or leakage. The inside and outside of the bottle should be clean.
2. cover
(1) Inner cover: The inner cover should be complete, smooth, clean and free from deformation. The inner cap should fit well with the bottle and outer cap. The inner cover should not be left out. (2) Outer cover: The outer cover should be upright, smooth, and free from breakage, cracks, and burrs (burrs). The color of the outer cover should be uniform. The screw fit structure of the outer cover should be intact. The color of the cover with anodized aluminum or hot stamping should be uniform. The flip-top cover should be turned up flexibly, and the connection parts should not be broken. The fit between the cap and the bottle should be tight without slipping or loosening.
3. Bag
Bags should not have obvious wrinkles, scratches, or air bubbles. The color of the bag should be uniform. The seal of the bag should be firm, and there should be no opening, perforation, or leakage (paste). The compound bag should be compounded firmly and evenly coated.
4. Hose The body of the hose should be smooth, clean, uniform in thickness, without obvious scratches, and the color should be uniform. The sealing of the hose should be firm and correct, and there should be no openings or wrinkles (except for the normal indentation of the mold). The cover of the hose should meet the requirements of 5.3. The composite film of the hose should have no floating phenomenon.
5. The surface of the box should be smooth and straight, and there should be no obvious bottom scratches, burrs (burrs), severe compression and damage. The tightness of the opening of the box should be appropriate. When taking out the flower box, do not use your fingers to forcibly peel it off, so as to pinch the edge of the cover and the bottom does not fall off automatically. The mirror inside the box, the contents and the box should be firmly pasted, the mirror image should be good, and there should be no scratches or damage on the bottom.
6. The tank body of the spray tank is flat, without rust spots, the weld seam is smooth, there is no obvious scratch or concave tank phenomenon, and the color and luster should be uniform. The mouth of the spray can should be smooth, without wrinkles, cracks and deformation. The cover of the spray can should meet the requirements of 5.3.2.
7. Spindle tube The tube body of the ingot tube should be straight and smooth, without cracks, burrs (burrs), and there should be no obvious scratches, and the color should be uniform. The fit of the parts of the ingot tube should be tight enough to ensure that the contents can be unscrewed or pushed out normally.
8. Cosmetic pen The pen holder and pen cover of the cosmetic pen should be smooth and straight, without glue and paint film cracking. The barrel of the cosmetic pen and the pen cover should be tightly matched. The color of the makeup pencil should be uniform.
9. Nozzle Nozzles should be upright and clean without damage or cracks. The assembly parts of the nozzle should be intact to ensure the smooth flow of the spray.
10. Printing and labeling
The patterns and writings printed on cosmetic packaging should be neat, clear, not easy to fall off, and the color should be uniform. Cosmetic packaging labels should not be wrongly posted, missed, or upside down, and should be firmly pasted. Labeling requirements are in accordance with GB 5296.3.
Ningbo Huiho Cosmetics Packaging Co., Ltd. is
Custom Color Cosmetics Packaging Suppliers in China, The color cosmetic packaging (such as lipstick tube, mascara tube, eyeliner, lip gloss, etc.) produced by the company is at the top of the industry with the advantages of "novel style, excellent quality, reasonable price, bright color, and wide variety".
